Moving mirrors and glass is a padding and orientation job. A mirror fails at a corner or when it flexes. A glass tabletop fails when it rides loose on its base or flat under a stack of boxes. Neither piece should be treated like a picture in a small frame. Measure them, take hardware off, and tell the crew which surfaces are glass before the first trip to the truck.
Take the glass off the furniture
Lift glass tops off dining tables, desks, and dressers before moving day if you can do that safely with a second person. Tape a label to the furniture, not to the glass, that says the top is packed separately. Bag the suction cups, clips, or small brackets and tape the bag to the underside of the table or put it in a hardware box. A top without its clips becomes a project at the new house.
Do not leave a sheet of glass on a base “because it is attached.” Bumps in a doorway pop clips, and a sliding top can walk off the apron. If a top is glued or built in, say so. Forcing it off is how a chip starts.
Pad edges when moving mirrors and glass
Keep mirrors upright. Pad the frame and the corners, and keep the face from touching another mirror, a tabletop, or a bare wall of the truck. Do not lay a large mirror flat under boxes. The weight in the middle is what cracks it, even when the corners look fine. Skip tape on the mirror face. Adhesive can pull a backing or leave a mark that does not come off.
The same care used for moving artwork and valuables applies to framed mirrors. Unframed glass wants a carton or pads on both faces, with the piece marked “glass” on the outside. The notes on packing fragile items are a useful match for smaller panes. A wall-size mirror is closer to furniture than to a dish box.
Bathroom mirrors that are glued to the wall usually stay. A framed mirror over a vanity, a leaning floor mirror, and a mirrored closet door are different. Say which of those are yours. Mirrored doors are heavy and the track hardware is easy to lose. If a door is coming off so furniture can pass, keep the mirror protection in place and bag the screws before the doorway becomes a traffic lane.
Check the path before you commit
Measure the mirror or top on the diagonal as well as the height and width. A piece that clears a door straight on can still fail on a stair turn. Use the checks in what to measure before moving day, and include the railing and any light that hangs low. If the glass will not make the turn, it needs a different path or it stays. Leaning it on a banister “just for a second” is how it falls.
- Glass tops off the base, with hardware bagged.
- Mirrors upright, corners padded, no tape on the face.
- A clear path wider than the piece, including stair turns.
- A wall at the new house where a mirror can stand until it is hung.
Name the room where each large piece should stand. Hanging hardware and anchors are a separate task from carrying the glass. Have the wall ready, or pick a safe leaning spot that is not the main walkway.
Miracle Movers of Florida moves local and long-distance households from Cape Canaveral and can include glass with the furniture when it is listed in advance. Packing is available if you want the smaller panes boxed before the truck arrives.
To put mirrors and glass tops on the load, call (407) 819-0886 and give the sizes.
